LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Instrument Panel - Coupe) >> Combination Meter Assembly And Vehicle Speed Sensor >> On-Vehicle Service >> Fuel Level Sensor Check >> Fuel Level Sensor Float Height

Fuel Level Sensor Float Height

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the float and measure height A at point

    Standard value: 

    • A: 180.3 mm (7.10 inches) 
    • B: 18.8 mm (0.74 inch) 
      Fig 1: Identifying Fuel Level Sensor Float Height
      G04537554Courtesy of DAIMLERCHRYSLER CORPORATION
  2. Adjust the float arm to the standard value, then go to Thermistor check.