Service Specifications
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| ITEMS | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Brake booster push rod protruding length mm (in) | 10.28 - 10.53 (0.404 - 0.415) | - | ||
| Brake pedal height mm (in) | 175 - 178 (6.9 - 7.0) | - | ||
| Brake pedal free play mm (in) | 3 - 8 (0.12 - 0.31) | - | ||
| Brake pedal to floor board clearance mm (in) | 90 (3.5) or more | - | ||
| Proportioning valve output fluid pressure MPa (psi) | Split point | 2.7 - 3.2 (391 - 462) | - | |
| When input fluid pressure is 9.8 MPa (1,422 psi). | 4.3 - 5.1 (619 - 732) | - | ||
| Proportioning valve output fluid pressure difference between left and right MPa (psi) | - | 0.4 (57) | ||
| Disc brake pad thickness mm (in) | 10.0 (0.4) | Minimum 2.0 (0.08) | ||
| Disc brake disc thickness mm (in) | Front | 2.4L ENGINE | 24.0 (0.9) | Minimum 22.4 (0.88) |
| 3.0L ENGINE | 26.0 (1.02) | Minimum 24.4 (0.96) | ||
| Rear | 10.0 (0.4) | Minimum 8.4 (0.33) | ||
| Disc brake disc run-out mm (in) | Front | - | 0.06 (0.002) | |
| Rear | - | 0.08 (0.003) | ||
| Front disc brake drags force N (lb) | 69 (16) or less | - | ||
| Rear disc brake drag force N (lb) | 69 (16) or less | - | ||
| Rear drum brake lining thickness mm (in) | 4.9 (0.19) | Minimum 1.0 (0.04) | ||
| Rear drum inside diameter mm (in) | 228.6 (9.00) | 230.6 (9.08) | ||
| Rear disc inside diameter mm (in) | 168.0 (6.61) | 169.0 (6.65) | ||
| Front hub end play mm (in) | - | 0.05 (0.002) | ||
| Rear axle shaft end play mm (in) | - | 0.05 (0.002) | ||