LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Mechanical Brake System - Base (Service Information) - Coupe) >> Rear Disc Brake Assembly >> Disassembly And Assembly >> Disassembly Service Points >> << B >> Piston Seal Removal

<< B >> Piston Seal Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not use a flat-tipped screwdriver or similar tool to remove piston seal. These may damage the inner side of the cylinder.
  1. Remove the piston seal with your finger tip.
  2. Clean piston surface and inner cylinder with trichloro-ethylene, alcohol, or specified brake fluid MOPAR(R) Brake Fluid/Conforming to DOT 3 or DOT 4.
    Fig 1: Cleaning Piston Surface And Inner Cylinder
    G04537131Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals