LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Mechanical Brake System - Base (Service Information) - Coupe) >> Rear Disc Brake Assembly >> Disassembly And Assembly >> Disassembly Service Points >> << A >> Piston Boot/Piston Removal

<< A >> Piston Boot/Piston Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Blow air little by little to remove the piston. The piston will rush out if a force of air is applied suddenly.

Place a piece of wood, etc. against the caliper body as shown. Blow compressed air through the brake hose connection hole to remove the piston boot and piston.

Fig 1: Blowing Compressed Air Through Brake Hose Connection Hole
G04537130Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals