LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Mechanical Brake System - Base (Service Information) - Coupe) >> Master Cylinder Assembly And Brake Booster >> Removal And Installation >> Installation Service Points >> >> A << Vacuum Hose Connection

>> A << Vacuum Hose Connection

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the vacuum hose with the white-marked sections facing up.
  2. Insert securely and completely until the vacuum hose at the engine side contacts the edge of the hexagonal part of the fitting, and then secure with the hose clamp.
    Fig 1: Installing Vacuum Hose With White-Marked Sections
    G04537105Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals