LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Fuel System - Except Coupe) >> Fuel Delivery >> Fuel Pressure Regulator >> Removal

Fuel Pressure Regulator: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The fuel pressure regulator is part of the fuel pump module. Remove the fuel pump module from the fuel tank to access the fuel pressure regulator. Refer to REMOVAL .

  1. Spread tangs on pressure regulator retainer.
  2. Pry fuel pressure regulator out of housing.
  3. Ensure both upper and lower O-rings were removed with regulator.
scientia non olet · About LEMON Manuals