LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Lubrication >> Oil Pressure Relief Valve >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Remove the oil pan. See REMOVAL .
  2. Remove the pressure relief valve by remove the threaded retaining cap from the oil pump housing.
    CAUTION: Oil pump pressure relief valve must be installed as shown in figure or engine damage may occur.
    Fig 1: Removing Oil Pressure Relief Valve
    G00385993Courtesy of CHRYSLER CORP.
  3. Remove spring and relief valve.
scientia non olet · About LEMON Manuals