LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Lubrication >> Oil Pan >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Disconnect negative battery cable.
  2. Remove engine oil dipstick and tube.
  3. Raise vehicle on hoist.
  4. Drain engine oil and remove oil filter.
  5. Remove structural collar.
    Fig 1: Removing Structural Collar
    G00385991Courtesy of CHRYSLER CORP.
  6. Remove exhaust cross-under pipe.
  7. Remove torque converter housing cover.
  8. Remove lower bolt attaching the A/C compressor to oil pan.
    CAUTION: Assure removal of the two bolts attaching the timing cover to the oil pan, as damage to the timing cover and/or oil pan may occur.
  9. Remove oil pan attaching fasteners. Remove oil pan and gasket.
Fig 2: Removing Oil Pan & Gasket
G00385992Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals