LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Cylinder Head >> Removal & Installation >> Cleaning

Removal & Installation: Cleaning

To ensure engine gasket sealing, proper surface preparation must be performed, especially with the use of aluminum engine components and multi-layer steel cylinder head gaskets.

NOTE: Multi-Layer Steel (MLS) head gaskets require a scratch free sealing surface.

Remove all gasket material from cylinder head and block REMOVAL SERVICE POINTS . Be careful not to gouge or scratch the aluminum head sealing surface. Clean all engine oil passages.

scientia non olet · About LEMON Manuals