LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1999 >> Sebring Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Disc Brakes & Drum Brakes - Except Coupe) >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1999 Plymouth Breeze, 1999 Dodge Stratus, 1999 Chrysler Cirrus, 1998 Plymouth Breeze, and 1998 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Bench bleed master cylinder. See BENCH BLEEDING MASTER CYLINDER  under BLEEDING BRAKE SYSTEM. Install NEW vacuum seal in brake booster. To complete installation, reverse removal procedure. Bleed hydraulic brake system. See BLEEDING BRAKE SYSTEM  .

Fig 1: Locating Master Cylinder Components
G95B13384Courtesy of CHRYSLER CORP.