Chrysler Technical Bulletin 21-10-95

This bulletin applies to 41TE transaxles with a date code between 2183 and 2295. This symptom causes a transaxle limp-in condition.

Using scan tool, verify all engine/transmission systems are functioning correctly. Repair as needed. Test drive vehicle until transaxle normal operating temperature is reached. Using scan tool, monitor input speed sensor signal. If input speed sensor signal drops to 0 RPM, and DTCs 36, 50, 51, 52, 53, 54, 55, or 56 is set, install new Input Speed Sensor (4412878).