LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1993 >> Imperial >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.3L V6 - VINS [R,T] & 3.8L V6 - VIN [L] >> Overhaul >> Cylinder Block Assembly >> Rod Bearings

Rod Bearings

Before installing rod bearings, hold a straightedge across threads of connecting rod bolts. Ensure connecting rod bolt threads contact straightedge in all areas. If threads fail to contact straightedge, bolts are stretched and must be replaced. Apply light coat of engine oil to connecting rod bolt threads before tightening nut to specification. See TORQUE SPECIFICATIONS  .

CAUTION: Crankshaft journal grinding should not exceed .012"(.30 mm) under standard size. DO NOT grind thrust surfaces of main bearing No. 2. Final paper or cloth polishing after regrind must be done in same direction as engine rotation.
scientia non olet · About LEMON Manuals