Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition - On/Vehicle - In Service Mode
- Press and release the switch: S147L Manual Transmission Shift Anticipate Switch - Left
Verify the display at the component: Gear Indicator@P16 Instrument Cluster = Yellow
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Press and release the switch: S147L Manual Transmission Shift Anticipate Switch - Left
- Press and release the switch: S147R Manual Transmission Shift Anticipate Switch - Right
Verify the display at the component: Gear Indicator@P16 Instrument Cluster = Yellow
- If not the specified state
Refer to: Circuit/System Testing
- If not the specified state
- All OK.