Conditions for Running the DTC

• Accelerator Pedal Position = Greater than 8%
• CPP Sensor = Greater than 70% - Released
• Gear Position Sensor Learn Status = Learned
• Engine Torque = Greater than 50 N.m (37 lb ft)
• Ignition = On
• Transmission OSS = Greater than 120 RPM
• {P0729} Gear Ratio = 0.64 - 0.73: 1 - Calculated
• {P0731} Gear Ratio = 2.25 - 2.41: 1 - Calculated
• {P0732} Gear Ratio = 1.57 - 1.66: 1 - Calculated
• {P0733} Gear Ratio = 1.17 - 1.26: 1 - Calculated
• {P0734} Gear Ratio = 0.96 - 1.05: 1 - Calculated
• {P0735} Gear Ratio = 0.78 - 0.87: 1 - Calculated
• {P076F} Gear Ratio = 0.41 - 0.50: 1 - Calculated

Frequency the DTC runs = Continuously - After the running conditions are metFor greater than 1.5 s