Single Use Fasteners and Components

WARNING: This page is about a different variant/trim than selected.

Turbine Shaft Seal

Courtesy of GENERAL MOTORS COMPANY

Align the bolt hole indicated by the arrow with the arrow that is cast into the case and push down to seat.
Stator Shaft Support (1) - Install

CAUTION:

Refer to Fastener Caution .

Stator Shaft Support Bolt (2) - Install and tighten M8 x 33 [9x] 35 N.m (26 lb ft)
Turbine Shaft Seal - O-Ring (3) - Install NEW