Installation Procedure
WARNING: This page is about a different variant/trim than selected.
Rotate the transmission horizontal to aid in installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly.
- 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch (1) - Install
- Verify proper installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly by measuring as indicated (a). An approximate measurement of 62.78 mm (2.472 in) indicates correct installation.
- 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing Washer (2) - Install
- 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing (3) - Install
NOTE:
Ensure proper orientation of bearing.