Torque Converter Removal and Holding Fixture Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the Transmission Housing Sound Insulator. Transmission Housing Sound Insulator Replacement (LGX) , or Transmission Housing Sound Insulator Replacement (LT1, LT4) |
|
| 1 | Torque Converter Special Tools DT-46409 Torque Converter Lifting Handles Equivalent regional tools: Special Tools |
| 2 | Automatic Transmission Case Procedure Rotate the transmission so that the converter housing is up and secure with locking pin. Special Tools
Equivalent regional tools: Special Tools |