Control Valve Solenoid Body Assemble 1 of 2
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts in the following chart represent components shown in graphic above.
Control Valve Solenoid Body Assemble 1 of 2
| Callout | Component Name |
|---|---|
| 1 | Valve Body Fluid Passage Cover |
| 2 | Control Valve Upper Body Bolt Tighten 9 N.m (80 lb in) |
| 3 | Control Valve Upper Body Bolt [3] Tighten 9 N.m (80 lb in) |
| 4 | Automatic Transmission Fluid Pump Seal |
| 5 | Automatic Transmission Fluid Temperature Sensor Procedure Push sensor in and turn clockwise to install. |
| 6 | Valve Body Fluid Passage Cover |