Section 37 (Engine Mechanical - 2.0L - Description And Operation)

• Description and Operation
  • Vacuum Operated Engine Mounts Description and Operation
    • Notes
    • Valve Assembly Functional Test
    • Engine Mount Vacuum System Leak Test
    • 4-State Vacuum Operated Engine Mount System
    • Vacuum Operated Engine Mount
    • Valve (Solenoid) Assembly
    • Idle State - Vacuum Applied to both Ports
    • Driveaway State - No Vacuum Applied
    • Smooth Road Shake (SRS) State - Vacuum Applied to Vacuum Port 1 Only
  • Compressor Air Intake Turbocharger System Description
    • Turbocharger Description and Operation
    • Charge Air Cooler Description
    • Benefits of Dual Cam Phasing
    • Benefits of Gasoline Direct Injection
    • Electronic Vacuum Pump
    • Recommendations for Service
  • Crankcase Ventilation System Description
    • General Description
    • Operation
    • Results of Incorrect Operation
  • Engine Component Description
    • Engine Description
  • Lubrication Description
  • Cleanliness and Care
  • Separating Parts
  • Replacing Engine Gaskets
    • Special Tools
    • Gasket Reuse and Applying Sealants
    • Separating Components
    • Cleaning Gasket Surfaces
    • Assembling Components
  • Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
    • Cleaning Mating Part Surfaces for RTV Joints
    • Typical Applications
    • Materials Needed
    • Sealant Types
  • Tools and Equipment