Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Intake Manifold Cover Replacement - Remove
- Positive Crankcase Ventilation Tube@Air Cleaner Outlet Duct - Disconnect - Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Air Outlet Duct to PCV Oil Separator) , or Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Air Outlet Duct to Camshaft Covers)
Positive Crankcase Ventilation Tube Retainer (1) - Unclip
- Reposition the Positive Crankcase Ventilation Tube as necessary to gain access to the Camshaft Position Sensor.
- WARNING:
Refer to Safety Glasses Warning .
Use compressed air to remove debris from the Camshaft Position Sensor and surrounding cavities.
- Camshaft Position Sensor Electrical Connector(1)@Camshaft Position Sensor(2) - Disconnect
Camshaft Position Sensor Bolt(1) - Remove
- Camshaft Position Sensor(2) - Remove