Front Side Door Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Apply masking tape to the fender and door edges. Disconnect the electrical connector. Support the door before removing the hinge bolts.
1	Front Side Door Check Link Bolt CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Front Side Door Upper Hinge Bolt [2x] Tighten 25 N.m (18 lb ft)
3	Front Side Door Lower Hinge Bolt [2x] Tighten 25 N.m (18 lb ft)
4	Front Side Door Procedure With the aid of an assistant, remove the door. When replacing the door it is necessary to transfer all of the internal components. Front Side Door Adjustment (Coupe) , or Front Side Door Adjustment (Convertible)