Shift Shaft Assemblies and Gear Cluster Removal
WARNING: This page is about a different variant/trim than selected.
Pull up on the 3rd/4th shift fork assembly (2) and rotate the 5th/6th and the reverse shift shaft levers off the shift interlock plate.
- Remove the 5th/6th and the reverse shift shaft assembly (1).
Remove the countershaft. Lift up the mainshaft enough in order to remove the countershaft.
Remove the mainshaft and the shift shaft components as an assembly.
- Remove the shift shaft assembly from the mainshaft.
Remove the 4th gear blocking ring assembly, which includes the following components:
- 4th speed drive gear blocking ring (2)
- 4th speed drive gear outer cone (3)
- 4th speed drive gear inner cone (4)
- Remove the input shaft (1).