Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Transmission Mount (2) - Install

NOTE:

For proper bolt alignment, loosely install all mount bolts prior to tightening to specifications.

Transmission Mount Bolt (1) - Loosely install
Courtesy of GENERAL MOTORS COMPANY

Transmission Mount Bracket Bolt (1) - Loosely install [4x]
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

NOTE:
Ensure that the snubber is properly aligned with the tabs on the transmission mount prior to tightening.

Transmission Mount Bolt (1) - Tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Transmission Mount Bracket Bolt (1) - Tighten [4x] - Fastener Specifications
Remove the jack stand.
Lower the vehicle.