Removal Procedure
Warm Up Three-Way Catalytic Converter - Remove - Warm Up Three-Way Catalytic Converter Replacement (LIH)
- Charge Air Cooler Inlet Air Hose - Remove - Charge Air Cooler Inlet Air Hose Replacement
- Air Cleaner Outlet Rear Duct - Remove - Air Cleaner Outlet Rear Duct Replacement
- NOTE:
DO NOT remove the positive crankcase ventilation vacuum hose unless replacement of either the vacuum hose or turbocharger is necessary.
- The positive crankcase ventilation vacuum hose clamps are tamper-proof connections.
- The turbocharger can be removed and set aside so long as the vacuum hose connection remains intact and undamaged.
Positive Crankcase Ventilation Vacuum Hose Clamp @ Camshaft Cover - Remove and DISCARD - Positive Crankcase Ventilation Vacuum Hose Replacement
Turbocharger Wastegate Actuator Vacuum Control Solenoid Valve Hose - Remove - Turbocharger Wastegate Actuator Vacuum Control Solenoid Valve Hose Replacement
Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube - Remove - Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube Replacement
Turbocharger Coolant Return Pipe - Remove - Turbocharger Coolant Return Pipe Replacement (LIH)
- Turbocharger Coolant Feed Pipe - Remove - Turbocharger Coolant Feed Pipe Replacement (LIH)
Turbocharger Oil Return Pipe - Remove - Turbocharger Oil Return Pipe Replacement
Turbocharger Oil Feed Pipe - Remove - Turbocharger Oil Feed Pipe Replacement
Turbocharger Nut (1) - Remove and DISCARD [4x]
- Turbocharger (2) - Remove
Positive Crankcase Ventilation Vacuum Hose Clamp (1) @ Turbocharger - Remove and DISCARD
- Positive Crankcase Ventilation Vacuum Hose (2) - Remove and DISCARD