LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Malibu LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Front Seat Vertical Actuator Lever Replacement

Front Seat Vertical Actuator Lever Replacement

GM4195479Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Front Seat Adjuster Handle Replacement 
1 Front Seat Adjuster Finish Cover Bolt Cap
2 Front Seat Vertical Actuator Lever Fastener [2x]
CAUTION:

Refer to Fastener Caution .

  1. Remove the seat back frame bolts.
  2. If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps:
    1. Remove any loose cured adhesive from the external threads of the components using a lint free cloth.
    2. Thread the cleaned components into the internal mating threads and remove to loosen trapped cured adhesive.
    3. Apply thread locking adhesive to the external threads of the components. Adhesives, Fluids, Lubricants, and Sealers (except GMNA) , or Adhesives, Fluids, Lubricants, and Sealers (GMNA) 
    4. Ensure there are no gaps in the thread locking adhesive once applied to the component.

Tighten 
2.5 N.m (22 lb in)
3 Front Seat Vertical Actuator Lever
scientia non olet · About LEMON Manuals