LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Malibu LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Front Seat Adjuster Handle Replacement

Front Seat Adjuster Handle Replacement

GM4195475Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Front Seat Adjuster Finish Cover Bolt Cap
2 Front Seat Adjuster Handle Fastener
CAUTION:

Refer to Fastener Caution .

  1. Remove the front seat belt buckle fastener.
  2. If a NEW threaded component is being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded component is reused, prepare the threaded component using the following steps:
    1. Remove any loose cured adhesive from the external threads of the component using a lint free cloth.
    2. Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive.
    3. Apply thread locking adhesive to the external threads of the component.Adhesives, Fluids, Lubricants, and Sealers (except GMNA)  , or  Adhesives, Fluids, Lubricants, and Sealers (GMNA)  
    4. Ensure there are no gaps in the thread locking adhesive once applied to the component.

Tighten 
2.5 N.m (22 lb in)
3 Front Seat Adjuster Handle
scientia non olet · About LEMON Manuals