Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Remove Driver And Passenger Seat (2). Front Seat Removal And Installation
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate (1) - Remove - Front Floor Console Trim Plate Replacement (Equinox)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Applique (1) - Remove - Front Floor Console Applique Replacement (Equinox)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Right Side (1) - Remove - Front Floor Console Extension Panel Replacement - Right Side (Equinox)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Left Side (1) - Remove - Front Floor Console Extension Panel Replacement - Left Side (Equinox)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt (1) @ Instrument Panel - Remove [ 2X ]
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt (1) @ Automatic Transmission Control - Remove [ 2X ]
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt Access Hole Cover (1) - Remove
Use A Flat Bladed Plastic Trim Tool.
Front Floor Console Bolt (2) @ Front Floor Console Bracket - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt (1) @ Automatic Transmission Control - Remove [ 2X ]
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt Access Hole Cover (1) - Remove
Use A Flat Bladed Plastic Trim Tool.
Front Floor Console Bolt (2) @ Front Floor Console Bracket - Remove
Courtesy of GENERAL MOTORS COMPANY

With The Aid Of An Assistant, Remove The Console From The Vehicle. (1)
Slide The Front Floor Console Assembly (1) Back To Clear The Two Guide Pins.
Disconnect The Electrical Connectors.
Transfer Components As Necessary.