Windshield Wiper System Module Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Preliminary Procedure Air Inlet Grille Panel Replacement The windshield wiper arm adjustment procedure contains important instructions. Always reference the adjustment procedure when removing or replacing the windshield wiper system module. Windshield Wiper Arm Adjustment |
|
| 1 | Windshield Wiper System Module Bolt [ 2x ]
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb/in) |
| 2 | Windshield Wiper System Module Procedure Disconnect the electrical connector. |