LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer RS, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3D), 9T60 (M3T) Or 9T65 (M3V) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Mount Replacement (Left) >> Removal Procedure

Removal Procedure

  1. Install the engine support fixture.
  2. Remove the battery tray. Battery Tray Replacement
  3. GM5396008Courtesy of GENERAL MOTORS COMPANY

    Transmission Mount Brace Bolt (1) - Remove [2x]

  4. Transmission Mount Brace (2) - Remove
  5. GM5396004Courtesy of GENERAL MOTORS COMPANY

    Transmission Mount Bolt (1) - Remove [2x]

  6. Fig 1: Identifying Transmission Mount And Bolts With Loosening Sequence
    GM5396005Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    The stated fastener removal or installation sequence must be followed to avoid damage to the components of the mount assembly.

    Remove the 4 transmission mount bolts (1) in sequence shown.

  7. Transmission Mount (2) - Remove
scientia non olet · About LEMON Manuals