LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the park brake and chock the wheels.
  2. GM5138440Courtesy of GENERAL MOTORS COMPANY

    Slide the retainer lock (2) forward to expose the cable adjustment retainer (3).

  3. Using a suitable tool, raise the cable adjustment retainer (3) to the unlock position.
  4. Remove the range selector lever cable screw (1).
  5. Remove the console. Front Floor Console Replacement
  6. GM5138311Courtesy of GENERAL MOTORS COMPANY

    Remove the transmission range selector lever screws (1, 2).

  7. GM4200030Courtesy of GENERAL MOTORS COMPANY

    Move the floor carpet in order to gain access to the gear shift cable grommet (2).

  8. Remove the grommet fasteners (1) and the transmission range selector lever cable grommet from the cowl panel.
  9. Remove the transmission range selector lever cable from the vehicle.