Front Floor Console Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Chock the wheels to prevent the vehicle from moving. Failure to chock the wheels can cause personal injury when the electrical system is repaired. Preliminary Procedure Position the shift control lever to low gear to aid in the removal of the front floor console. Front Floor Console Trim Plate Replacement
1	Front Floor Console Bolt Access Hole Cover [2x] Procedure Use a flat bladed plastic trim tool.
2	Front Floor Console Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 7 N.m (62 lb in)
3	Front Floor Console Retainer [2x] Procedure Use a flat bladed plastic trim tool.
4	Front Floor Console Nut [2x] Procedure If the nuts are disengaged from the bracket it may hinder the removal of the floor console. You will need to remove the front floor console rear trim panel and position the nut back onto the bracket. Front Floor Console Rear Trim Panel Replacement
5	Front Floor Console Procedure Disconnect all electrical connectors. Transfer components as necessary.