Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Front Suspension Strut Mount Bolt (1) - Remove [4x]
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Front Wheel Speed Sensor Wiring Harness (1) @Steering Knuckle - Separate - Front Wheel Speed Sensor Replacement
- Front Brake Hose (2) @Strut Assembly - Separate - Front Brake Hose Replacement
Front Stabilizer Shaft Link (1) @Strut Assembly - Separate - Stabilizer Shaft Link Replacement
Steering Knuckle Nut (1) - Remove [2x]
- Steering Knuckle Bolt (2) - Remove [2x]
DISCARD the bolts.
Remove the front suspension strut assembly (1) from the vehicle.
- Transfer components as necessary.