Stabilizer Shaft Link Replacement
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation |
|
| 1 | Front Stabilizer Shaft Link Nut [2x]
CAUTION:
Use the proper tool to hold the front stabilizer shaft link stud from rotating while servicing the front stabilizer shaft link nut. Do not hold onto other components of the link assembly, such as the rubber boot, or damage could result.
CAUTION:
Refer to Fastener Caution . Tighten 100 N.m (74 lb ft) |
| 2 | Front Stabilizer Shaft Link Procedure Install the front tire and wheel assembly. Tire and Wheel Removal and Installation |