LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Exhaust System) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement (LKN) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.

WARNING:

Avoid contact with HOT components. Wear safety glasses and protective gloves to avoid personal injury.

  1. GM4329589Courtesy of GENERAL MOTORS COMPANY

    Heated Oxygen Sensor-Sensor 1 (3) - Remove - Heated Oxygen Sensor Replacement - Sensor 1

  2. GM4331653Courtesy of GENERAL MOTORS COMPANY

    Heated Oxygen Sensor-Sensor 2 (2) - Remove - Heated Oxygen Sensor Replacement - Sensor 2

  3. GM4332309Courtesy of GENERAL MOTORS COMPANY

    Exhaust Gas Recirculation Cooler Temperature Sensor-Position 2 (3) - Remove - Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2

  4. GM4215328Courtesy of GENERAL MOTORS COMPANY

    Hood Primary Latch (2) - Remove - Hood Primary Latch Replacement

  5. GM4295421Courtesy of GENERAL MOTORS COMPANY

    Catalytic Converter Heat Shield Nut (1) - Remove

  6. Catalytic Converter Heat Shield Bolt (2) - Remove [4x]
  7. Catalytic Converter Heat Shield (3) - Remove