Hood Primary Latch Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Mark the position of the hood latch with a grease pencil.
1	Hood Primary Latch Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Hood Primary Latch Procedure Disconnect the release cable from the hood primary latch. Disconnect the hood secondary latch release cable from the hood primary latch. Align the hood primary latch if necessary. Disconnect the electrical connector and retainer from under the upper tie bar.

Callout

Component Name

Preliminary Procedure
Mark the position of the hood latch with a grease pencil.

Hood Primary Latch Bolt [2x]

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Hood Primary Latch

Procedure

Disconnect the release cable from the hood primary latch.
Disconnect the hood secondary latch release cable from the hood primary latch.
Align the hood primary latch if necessary.
Disconnect the electrical connector and retainer from under the upper tie bar.