Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Catalytic Converter Heat Shield (3) - Install
- Catalytic Converter Heat Shield Bolt (2) - Install and tighten [4x] 10 N.m (89 lb in)
- Catalytic Converter Heat Shield Nut (1) - Install and tighten10 N.m (89 lb in)
Hood Primary Latch (2) - Install - Hood Primary Latch Replacement
Exhaust Gas Recirculation Cooler Temperature Sensor-Position 2 (3) - Install - Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2
Heated Oxygen Sensor-Sensor 2 (2) - Install - Heated Oxygen Sensor Replacement - Sensor 2
Heated Oxygen Sensor-Sensor 1 (3) - Install - Heated Oxygen Sensor Replacement - Sensor 1
CAUTION:
Refer to Fastener Caution .