Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Set the park brake and chock the wheels.
- Reposition the engine control module. Do NOT disconnect the wiring harness connectors. Position the engine control module aside. See ENGINE CONTROL MODULE REPLACEMENT
Automatic Transmission Range Selector Lever Cable Bolt (1) - Remove
- Slide the retainer lock (2) forward to expose the cable adjustment retainer (3).
- Using a suitable tool, raise the cable adjustment retainer (3) to the unlock position.
- Remove the range selector lever cable (4) from the range selector lever cable lever and the range selector lever cable bracket.
- Front Floor Console - Remove - Front Floor Console Replacement
Transmission Range Selector Lever Cable Grommet Nut (1) - Remove [2x]
- Transmission Range Selector Lever Cable Retainer (2)Disengage
Remove the range selector lever cable screw (1) from the transmission control.
- Remove the range selector lever cable screw (2) along with the range selector lever cable (3) from the transmission control.
- Remove the range selector lever cable from vehicle by pulling it into the interior.
NOTE:
The cable screw (2) is not separated from the range selector lever cable.