Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Install the range selector lever cable to vehicle by installing it from the interior.
Courtesy of GENERAL MOTORS COMPANY

Range Selector Lever Cable (3)@Transmission Control - Install

CAUTION:
Fastener Caution
Install the 2 range selector lever cable screws (1, 2) and tighten to 9N.m (80 lb in).
Courtesy of GENERAL MOTORS COMPANY

Transmission Range Selector Lever Cable Grommet Nut (1) - Install and tighten [2x] 6.5N.m (58 lb in)
Front Floor Console - Install - Front Floor Console Replacement
Courtesy of GENERAL MOTORS COMPANY

Install the range selector lever cable (4) to the range selector lever cable lever.
Automatic Transmission Range Selector Lever Cable Bolt (1) - Install and tighten9N.m (80 lb in)
Depress the cable adjustment retainer (3) locking the retainer completely.
Slide the retainer lock (2) rearward to cover the cable adjustment retainer (3).
Range Selector Lever Cable - Adjust - Range Selector Lever Cable Adjustment
Engine Control Module - Install - See ENGINE CONTROL MODULE REPLACEMENT