LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Inlet Hose Replacement (LTG)

Heater Inlet Hose Replacement (LTG)

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM4241079Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Drain the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
1 Heater Inlet Hose Clamp [2x]
Procedure 
Hose Clamp Replacement Guidelines - Spring Type
2 Heater Inlet Hose

Procedure

  1. Fill the cooling system to the proper level. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
  2. Start the engine and check for coolant leaks.
scientia non olet · About LEMON Manuals