Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Heater Coolant Pump (2) - Position in the vehicle.
- Heater Coolant Pump Bracket Bolt (1) - Install and tighten 9 N.m (80 lb in)
- Electrical Connector @ Heater Coolant Pump - Install
Install the engine electrical harness connector (1) to the heater coolant pump bracket bolt.
Heater Coolant Pump Hose - Outlet (2) @ Heater Coolant Pump - Install
- Heater Coolant Pump Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
Heater Coolant Pump Hose - Inlet (2) @ Heater Coolant Pump - Install
- Heater Coolant Pump Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
- Engine Control Module and Bracket - Install Engine Control Module Replacement
- Fill the cooling system to the proper level. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
- Start the engine and check for coolant leaks.
CAUTION:
Refer to Fastener Caution .