Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the new O-ring seal for any sign of cracks, cuts, or damage.
- Remove the cap or tape from the A/C refrigerant components.
- Using a lint-free clean, dry cloth, carefully clean the sealing surfaces of the A/C refrigerant components.
- Lightly coat the new O-ring seal with the recommended refrigerant oil. Adhesives, Fluids, Lubricants, and Sealers
- Carefully slide the NEW O-ring seal (1) onto the A/C refrigerant component.
The O-ring seal (1) must be fully seated.
- Assemble the A/C components.
Refer to the appropriate repair procedure.
NOTE:
Use only the recommended refrigerant oil or damage to the A/C system could occur.
NOTE:
DO NOT reuse O-ring seals.