Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air conditioning compressor hose to the vehicle.
Install a NEW sealing washer. (3) - Air Conditioning System Seal Replacement
- Air Conditioning Compressor Hose (1) - Install
- Air Conditioning Compressor Hose Nut (2) - Install and tighten 22 N.m (16 lb ft)
Install NEW sealing washers. (3) [2x]
- Air Conditioning Compressor Hose (1) - Install
- Air Conditioning Compressor Hose Nut (2) - Install and tighten 22 N.m (16 lb ft)
- Charge Air Cooler Inlet Air Tube - Install - Charge Air Cooler Inlet Air Tube Replacement
Air Conditioning Compressor Hose (1) - Install
- Air Conditioning Compressor Hose Bolt (2) - Install and tighten 9 N.m (80 lb in)
Install a NEW sealing washer. (3)
- Air Conditioning Compressor Hose (1) - Install
- Air Conditioning Compressor Hose Nut (2) - Install and tighten 22 N.m (16 lb ft)
- Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement
- Recharge the refrigerant. Refrigerant Recovery and Recharging (R-1234yf)
- Inspect for refrigerant leaks. Leak Testing (R-1234yf)
Install the front bumper fascia. (1) Front Bumper Fascia Replacement
CAUTION:
Refer to Fastener Caution .