Air Conditioning Clutch Drive Plate Adjustment
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Install the clutch plate assembly.
- Measure the air gap between the pulley and the drive plate. Adjust the shims to achieve a 0.14 - 0.024 in (0.35 - 0.60 mm) air gap.
- Install the clutch plate retaining bolt and tighten. Air Conditioning Compressor Replacement (LFV) , or Air Conditioning Compressor Replacement (LTG)
NOTE:
Ensure the drive plate does not drag against the pulley when the pulley is rotated.
CAUTION:
Refer to Fastener Caution .