Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- FRONT WHEELHOUSE LINER REPLACEMENT - RIGHT SIDE (LKN) - Remove
- Water Pump Belt Replacement - Remove
Install the EN-49979 mount retainer (1) to the crankshaft balancer.
- Install a 1/2 " drive extension with breaker bar to the EN-49979 mount retainer
- Loosen the crankshaft balancer bolt (2) while fixing the crankshaft balancer with EN-49979 mount retainer (1).
Crankshaft Balancer Bolt (1) - Remove
- Crankshaft Balancer (2) - Remove
NOTE:
A second technician is required.