Crankshaft Front Oil Seal Installation

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN-51152 Crankshaft Front Oil Seal Installer
J-44389-2 Forcing Screw

For equivalent regional tools, refer to Special Tools .

Courtesy of GENERAL MOTORS COMPANY

Install the NEW crankshaft front oil seal (1) to the EN-51152 installer (2).
Courtesy of GENERAL MOTORS COMPANY

Install the EN-51152 installer (1) with the NEW crankshaft front oil seal on the engine front cover.
Install the J-44389-2 forcing screw (2) and tighten.
Remove the J-44389-2 forcing screw (2) and EN-51152 installer (1).
Courtesy of GENERAL MOTORS COMPANY

Ensure that the crankshaft front oil seal (1) is flush with the engine front cover (2).