Camshaft Position Actuator Adjuster Removal
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
EN-51148 Camshaft Holding Tool
For equivalent regional tools, refer to Special Tools .
Install the EN-51148 holding tool (1) to the camshafts and to the cylinder head.
- Tighten the middle bolt (3).
- Tighten the 2 outer bolts (2, 4).
Remove the camshaft position actuator adjuster bolt (3).
- Remove the intake camshaft position actuator (1).
Remove the camshaft position actuator adjuster bolt (3).
- Remove the exhaust camshaft position actuator (2).