Automatic Transmission Flex Plate Removal

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN-652 Flywheel Holder

For equivalent regional tools, refer to Special Tools .

Courtesy of GENERAL MOTORS COMPANY

Install the EN-652 holder (2), lock the automatic transmission flex plate via the starter ring gear.
Loosen the 8 automatic transmission flex plate bolts (1).
Remove the EN-652 holder (2).
Courtesy of GENERAL MOTORS COMPANY

Remove and DISCARD the 8 automatic transmission flex plate bolts (1).
Remove the automatic transmission flex plate (2).
Courtesy of GENERAL MOTORS COMPANY

Remove the crankshaft position reluctor ring (1).