Removal Procedure
- Drain the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
- Recover the refrigerant. Refrigerant Recovery and Recharging (R-1234yf)
Air Conditioning Condenser Bracket (1) - Remove - Air Conditioning Condenser Bracket Replacement (LKN)
- Front Bumper Fascia Center Support - Remove - Front Bumper Fascia Center Support Replacement
Radiator Upper Bracket (3) -Left Side - Remove - Radiator Upper Bracket Replacement - Left Side (Front End Upper Tie Bar) , or Radiator Upper Bracket Replacement - Left Side (Upper Mounting Pin)
Radiator Upper Bracket (3) -Right Side - Remove - Radiator Upper Bracket Replacement - Right Side (Front End Upper Tie Bar) , or Radiator Upper Bracket Replacement - Right Side (Upper Mounting Pin)
Radiator Inlet Hose (2) @ Radiator Assembly - Remove - Radiator Inlet Hose Replacement (LKN)
Disconnect the engine cooling fan harness connectors (1) from the engine harness.
- Disconnect the ground wire from the front end upper tie bar.
Transmission Fluid Cooler Outlet Pipe (1) @ Transmission Fluid Cooler Pipe Clip - Remove - Transmission Fluid Cooler Outlet Pipe Replacement (LKN With MKE)
Transmission Fluid Cooler Outlet Pipe (2) @ Transmission Cooler Bypass Valve - Remove - Transmission Fluid Cooler Outlet Pipe Replacement (LKN With MKE)
Transmission Fluid Cooler Inlet Pipe (1) @ Transmission Fluid Cooler Pipe Clip - Remove - Transmission Fluid Cooler Inlet Pipe Replacement (LKN With MKE)
Transmission Fluid Cooler Inlet Pipe (2) @ Transmission Cooler Bypass Valve - Remove - Transmission Fluid Cooler Inlet Pipe Replacement (LKN With MKE)
Radiator Outlet Hose (2) @ Radiator Assembly - Remove - Radiator Outlet Hose Replacement (LKN)
Generator Control Module Coolant Pipe Clip (3) @ Engine Coolant FanRemove - Drive Motor Generator Control Module Coolant Pump Hose Replacement (Pump to Aux Radiator)
Engine Coolant Fan Wiring Harness (2) @ Generator Control Module Coolant PumpDisconnect
Engine Coolant Fan Module Radiator (1) - Remove
Disconnect the electrical connector.
- Engine Coolant Fan Shroud Bolt (1) - Remove [2x]
- Engine Coolant Fan (2) @ Radiator Assembly - Remove
Transmission Cooler Bypass Valve (1) @ Radiator AssemblyRemove
Radiator Upper Bracket (1) @ Radiator Assembly (3) - Remove
[2x]
- Radiator Lower Bracket (2) @ Radiator Assembly (3) - Remove [2x]
- Engine Coolant Temperature Sensor Retainer (5) @ Radiator Assembly (3) - Remove
- Engine Coolant Temperature Sensor (4) @ Radiator Assembly (3) - Remove