Front Floor Console Front Compartment Replacement (Without K4C)

Callout	Component Name
Preliminary Procedure Remove the front floor console cup holder plate. Refer to Front Floor Console Cup Holder Plate Replacement . Apply the parking brake. Place the transmission control rearward for access.
1	Front Floor Console Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Front Floor Console Front Compartment Screw (Qty: 2) Tighten 2 N.m (18 lb in)
3	Front Floor Console Front Compartment Procedures Use a flat bladed plastic trim tool in order to release the retainers securing the compartment to the front floor console. Using caution not to damage the surrounding plastic trim. Disconnect the electrical connection. NOTE: Be careful when removing the front compartment not to damage the 2 tabs located on both side of the compartment.