Turbocharger Oil Feed Pipe Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Exhaust Manifold Replacement (LWN)
NOTE:
For illustration purposes ONLY, the graphic is shown with the exhaust manifold removed from the turbocharger. It is not necessary to remove the exhaust manifold from the turbocharger. |
|
| 1 | Turbocharger Oil Feed Pipe Bolt
CAUTION:
Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) |
| 2 | Turbocharger Oil Feed Pipe |
| 3 | Turbocharger Oil Feed Pipe Washer [2x] Procedure Install NEW sealing washers. |